INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 250)

7 - 8
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
7 Highlight default.tun. Click OK. See Figure 7-12 .
NOTE: This will overwrite the default.tun file. See section 10.3 on page 10-12
for information on transferring files to the PC if saving a copy of this file
is desired prior to overwriting it.
Figure 7-12 Save "default.tun"
8 Replace the existing default.tun file when prompted.
9 Reboot HAPSITE from the front panel MAIN menu.
10 If the HAPSITE fails to tune after steps 1-9 have been performed, see section
7.6, Performing Manual Tune, on page 7-25 for information on performing a
Manual Tune.