INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 301)

8 - 25
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
8.9.2 Setting or Changing the Access Level Password
1 To change the Advanced level password, first enter Advanced level.
2 Press the Change Password button. See Figure 8-39 .
Figure 8-39 Change Password Button
3 The window shown in Figure 8-40 will appear.
Figure 8-40 Change Password Window
4 In order to change the password, the correct existing password must be
entered in the Old Password box. The new password must be entered in both
New Password and Verify New Password boxes. Press OK to set the new
password, or press cancel to exit without resetting the password.
5 Once the new password has been entered, the Change Access Level window
will re-appear. Press the Cancel button to close the window. Refer to
Figure
8-39 .
NOTE: Plus IQ remembers the last access level when closed. When the program
is re-opened, the system will default to the last access level used. If a
password has been set, the user will be required to enter the correct
password to open with Advanced access. If the password is not known, the
user can select Normal access and continue.