INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 264)

7 - 22
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Max OK Target Percentage . . . . . . Displays the maximum percentage required
for the mass peak to meet the OK High
criteria.
Base Peak . . . . . . . . . . . . . . . . . . . . Displays the base peak that the mass peak
percentage is measured against.
7.5.7 Mass Calibration Status
The dark gray Mass Calibration Status panel displays the status of the last Mass
Calibration. See
Figure 7-23 . The Mass Calibration Status panel can be displayed
by Right Mouse Button (RMB) click in the Peak Scan window, or by using the Tune
drop down menu and selecting the Mass Calibration Status.
Figure 7-23 Mass Calibration Status
Columns can be displayed or hidden with a Right Mouse Button click on the column
headings. See
Figure 7-24 .
Figure 7-24 Mass Calibration Menu
Mass . . . . . . . . . . . . . . . . . . . . . . . . Mass number.
Low%. . . . . . . . . . . . . . . . . . . . . . . . Minimum percentage for peak status OK.
High% . . . . . . . . . . . . . . . . . . . . . . . Maximum percentage for peak status OK.
Base. . . . . . . . . . . . . . . . . . . . . . . . . Reference mass for peak percentage
calculations.