INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 107)

3 - 13
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3.2 Selecting a Different Method Using the SELECT METHOD Icon
If the default method is not the desired method, the method can be changed.
Changing the method can occur when the system is preparing or when another
method has finished preparing.
1 When the PREPARING SYSTEM screen is displayed, touch STOP PREPARE.
Alternately, use the arrow keys to highlight STOP PREPARE and push OK
SEL. See
Figure 3-21 .
Figure 3-21 Stop Prepare Screen
2 The screen will prompt, Are you sure you want to stop preparing this
instrument? Touch Yes or using the arrow keys, highlight Yes and push OK
SEL. See
Figure 3-22 .
Figure 3-22 Stopping Preparation