INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 239)

6 - 5
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
The spectrum of the analyte must be recorded to the target compound library. The
spectrum is recorded by placing the scan cursor on the response curve (e.g., the
TIC) at a location that represents the concentration of the calibration standard. See
Figure 6-4 .
Figure 6-4 Sample Placing Cursor on Response Curve at Location of Calibration Standard
The spectrum must be recorded to the library. Highlight the spectrum window and
click the right mouse button to bring up the spectrum menu. Highlight Grab
Spectrum for Template to record the spectrum. See
Figure 6-5 .