INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 364)

11 - 4
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
11.2 Accessing Method Editor
CAUTION
Read all of Chapter 11 before creating a method.
NOTE: For questions relating to specific settings, refer to the previous sections of
this chapter.
Creating a method is a very involved process. Creating a method from scratch is
best left to experts; however, custom methods can be written by modifying a default
method.
To access Method Editor:
1 On the System Setup View, double-click on the Method Editor icon. See
Figure 11-46 .
Figure 11-4 Method Editor Icon
2 Choose the HAPSITE to which the method will be applied and click Open. See
Figure 11-47 .
Figure 11-5 Method Editor Open Window