INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 207)

5 - 1
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Chapter 5
Operating HAPSITE in Laptop Mode
5.1 Starting the HAPSITE in Laptop Mode
Starting the HAPSITE in Laptop Mode refers to using the HAPSITE in conjunction
with the Laptop computer.
NOTE: See Chapter 8, Plus IQ Software for additional information on the Plus IQ
Software installed on the Laptop computer.
Required Materials
 HAPSITE (AM)
 Internal standard gas canister
 Carrier gas canister
 Charged battery
 Probe
 Crossover cable
 Laptop computer
 Mouse (optional)
 Power supply
 AC To DC Power Converter power supply, unless powered by a Service
Module.
Procedure
1 Assemble the HAPSITE as shown in Section 2.4, Basic Assembly, on page 2-5 .
2 Press the POWER button on the front panel to turn on the HAPSITE. The
HAPSITE takes 1-2 minutes to power on.
NOTE: If desired and equipped, the HAPSITE can be used with the Laptop
computer connected via the wireless connection. Refer to Chapter 4,
Wireless and Touch Screen Options for additional information on
set-up and usage.
3 The Laptop computer needs to be powered on. Locate the power cord and
mouse (optional). Plug them into the appropriate places on the back of the
computer. Open the Laptop and press the power button.