INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 110)

3 - 16
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3.2.1 Changing the Default Method
The default method for the HAPSITE can be changed. By changing the default
method, the HAPSITE will prepare the newly selected method upon startup.
1 Touch SELECT METHOD.See Figure 3-27 .
Figure 3-27 Select Method
2 Highlight the desired method. See Figure 3-28 .
Figure 3-28 Choosing Method
3 Touch the Set Default button. Upon the next startup, the HAPSITE will begin
preparing the new default method.