INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 371)

11 - 11
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Probe . . . . . . . . . . . . . . . . . . . . . . . . The target temperature the Probe must
achieve before starting data acquisition. This
setting is not available when the Headspace
or SituProbe is enabled.
Sample Input Device
Probe . . . . . . . . . . . . . . . . . . . . . . . . The Probe is used for analyzing air samples
for volatile organic compounds.
Headspace. . . . . . . . . . . . . . . . . . . . This accessory is used for analyzing solids
and liquids for volatile organic compounds.
Additional components and their target
settings appear that are specific to the
Headspace. Refer to
Chapter 13, Headspace
Sampling System .
SituProbe . . . . . . . . . . . . . . . . . . . . This accessory is used for direct analysis of
liquid samples. For example, it can be placed
directly in a flowing sample stream
(continuous monitoring). Additional
components and their target settings appear
that are specific to the SituProbe.
In selecting a method, the Probe will automatically be highlighted in the drop down
box for the Sample Input Device Options. See
Figure 11-9 .
Figure 11-9 Sample Input Device Options