MagTek EC2000 99875607 - Manual (Page 38)

3 - Preventive Maintenance
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 38
3.11 Service the Image Printer Module
Follow these steps to service the image printer:
1) Make sure the interior of the EC2000 is clean (see section 3.10 Clean Inside the Device).
Performing image printer maintenance with dirt or debris inside the cover may damage the printer.
2) Open the image printer and clean its interior if necessary. Dust and other particles are attracted to the
image printer ribbon or card stock by static produced during image printing, and can contaminate
image-printed cards, causing spots or speckles.
3) Clean the card cleaning roller and replace it if necessary (see 99875600 ExpressCard 2000 User
Installation and Operation Manual for details).
4) Clean the image print head with head cleaning pen (see 99875600 ExpressCard 2000 User
Installation and Operation Manual for details).
5) Check handoff from image printer to XY transport. Adjust if needed (see section 5.3.2 How to
Calibrate Printer to XY Transport Handoff).