6 service the hopper module, Service the hopper module, 3 - preventive maintenance – MagTek EC2000 99875607 User Manual

Page 33

Text mode
Original mode

3 - Preventive Maintenance

ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual

Page 33

3.6 Service the Hopper Module

Follow these steps to service the hopper transport:

1) Use the

MCP Commands

page (see section 2.9 How to Use Maintenance Functions On the

Touchscreen) to move the hopper transport from the front to the rear of the device to verify the
movement is smooth and there is no belt slippage.

2) Only if the hopper transport rods are dirty, wipe off the dirt with a soft, lint-free cloth.

3) Check the hopper transport drive belt for signs of damage. If it is damaged, contact MagTek Support

Services for a replacement.