MagTek EC2000 99875607 - Manual (Page 165)

5 - Adjustments
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 165
3) Under the “Indenter Move” button, select Bot Cartridge Unload in the dropdown list.
4) Press the Indenter Move button. The device will move the indenter to the unload position.
5) Look at the up-down position of the negative letters or numbers (removed ink) on the indenter ribbon.
They should be centered between the top edge and bottom edge of the ribbon.
6) If they are not centered:
a) Navigate to Menu > Settings > Edit Config to open the Configuration Editing password
page.
b) Enter password 1234567 and press the E button.
c) Enter password 7654321 and press the E button.
d) Scroll down in the list and select the number below the BotCardTridgeHomeToIndent item.