MagTek EC2000 99875607 - Manual (Page 141)

5 - Adjustments
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 141
5 Adjustments
During scheduled maintenance or after replacing a module, testing may reveal that the settings for one or
more of the modules in the EC2000 need to be adjusted. This section is intended to be used as a
reference only when needed, and provides step-by-step instructions for adjusting calibration settings.
5.1 How to Calibrate the Touchscreen
If finger presses on the touchscreen are registering in the wrong place (for example, after replacing the
touchscreen), follow these steps:
1) Contact MagTek Support Services for assistance signing in to the device as an administrator and
accessing the Windows desktop.
2) Stand in front of the device (do not sit), because calibration depends on your viewing angle and most
of our users will be standing in front of the device on a countertop.
3) From the touchscreen’s Windows desktop, open the Tools shortcut.
4) From the Tools folder, launch the Touchkit shortcut to open the Touchkit : USB Controller
window.
5) Select the Tools tab.
6) Press the 4 Points Calibration button.