Brocade Network OS Message Reference v4.1.1 - Manual (Page 97)

Network OS Message Reference 81
53-1003227-01
AG-1018
8
AG-1018
Message
Host port should not be connected to port which is configured as N_Port.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an initiator or target is erroneously connected to a port configured for N_Port operation.
Recommended
Action
Run the show fabric islports command to display the status of all ports in the system and run show
running-config interface FibreChannel to display a list of ports currently configured as N_Ports.
Ensure the host is connected to a VF_Port.
AG-1020
Message
VF_Ports to N_Ports route/mapping has been changed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that VF_Port-to-N_Port mapping has been changed because the switch has come online or
some new N_Ports or VF_Ports have come online.
Recommended
Action
Execute the show ag map nport rbridge-id {rbridge-id | all} command to display the updated
VF_Port-to-N_Port mapping.
AG-1026
Message
Unable to handle the login request on port due to insufficient resources.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there are insufficient resources to accept the login request.
Recommended
Action
Increase the number of allowed logins on the specified port.
If the message persists, execute the copy support command and contact your switch service provider.