beautypg.com

Hasm-1012, Hasm-1013, Hasm-1014 – Brocade Network OS Message Reference v4.1.1 User Manual

Page 251

background image

Network OS Message Reference

235

53-1003227-01

HASM-1012

8

Recommended

Action

Check the error log on both management modules for additional messages that may indicate the reason
for the switch reload.

HASM-1012

Message

HA State starts to sync.

Message Type

LOG

Severity

INFO

Probable Cause

Indicates that the high availability (HA) state for the active management module starts to sync with the
HA state of the standby management module. If the standby management module is healthy, the system
may become in sync (see HASM-1100), and the failover afterwards will expect to be nondisruptive.

Recommended

Action

No action is required.

HASM-1013

Message

Restartable daemon () terminated prematurely. System initiated

failover/reload for recovery.

Message Type

LOG

Severity

CRITICAL

Probable Cause

Indicates that a restartable daemon terminated before the system has booted up completely.

Recommended

Action

After the system reloads, execute the copy support command and contact your switch service provider.

HASM-1014

Message

Restartable daemon () terminated while the system was booting up.

Message Type

LOG

Severity

CRITICAL

Probable Cause

Indicates that a restartable daemon terminated before the system has booted up completely.

Recommended

Action

Execute the copy support command and reload the system manually to recover.