Brocade Network OS Message Reference v4.1.1 - Manual (Page 187)

Network OS Message Reference 171
53-1003227-01
FABR-1008
8
FABR-1008
Message
.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that errors occurred during the request RBridge ID state; the information unit (IU) cannot be
allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory. Otherwise,
this message is rare and usually indicates a problem with the Network OS. The error descriptions are as
follows:
• FAB RDI: cannot allocate IU
• FAB RDI: cannot send IU
Recommended
Action
No action is required if the message appears with the FABR-1005 message.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1009
Message
.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that errors were reported during the exchange fabric parameter (EFP) state; cannot allocate
RBridge IDs list due to a faulty EFP type. This message is rare and usually indicates a problem with the
Network OS.
Recommended
Action
The fabric daemon will discard the EFP. The system will recover through the EFP retrial process.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1010
Message
.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that errors occurred while cleaning up the request RBridge ID (RDI). The error description
provides further details. This message is rare and usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.