Brocade Network OS Message Reference v4.1.1 - Manual (Page 380)

364 Network OS Message Reference
53-1003227-01
SEC-1033
8
SEC Messages
SEC-1033
Message
Invalid character used in member parameter to add switch to SCC policy; command
terminated.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a member parameter in the secpolicy defined-policy command is invalid (for example, it
may include an invalid character, such as an asterisk). A valid switch identifier (WWN, RBridge ID, or
switch name) must be provided as a member parameter in the secpolicy defined-policy command.
Recommended
Action
Execute the secpolicy defined-policy command using a valid switch identifier (WWN, RBridge ID, or
switch name) to add specific switches to the switch connection control (SCC) policy.
SEC-1034
Message
Invalid member .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the input list has an invalid member.
Recommended
Action
Verify the member names and input the correct information.
SEC-1036
Message
Device name is invalid due to a missing colon.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that one or more device names mentioned in the secpolicy defined-policy command does not
have the colon character (:).
Recommended
Action
Execute the secpolicy defined-policy command with a properly formatted device name parameter.