Brocade Network OS Message Reference v4.1.1 - Manual (Page 127)

Network OS Message Reference 111
53-1003227-01
BL-1029
8
BL-1029
Message
All ports on the switch will be reset as part of the firmware upgrade.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a recent firmware upgrade caused the switch internal processor firmware to be upgraded
and resulted in a cold upgrade. As part of the upgrade, all data path elements were reset.
Recommended
Action
No action is required.
BL-1031
Message
Link timeout in internal port (slot , port ) caused
interface module fault. Use power-off/power-on commands to recover it.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that link timeout occurred in one of the back-end internal ports.
Recommended
Action
Power cycle the interface module using the power-off and power-on commands.
BL-1032
Message
(,bitmap 0x) ports never came up ONLINE (reason , state ). Disabling slot.Message TypeLOGSeverityCRITICALProbable CauseIndicates that the back-end (non-user) ports have not come online within the time limit.RecommendedActionReload or power cycle the interface module using the power-off and power-on commands.Execute the diag systemverification command to verify that the interface module does not have
hardware problems.Execute the diag post command to make sure that Power-On Self-Test (POST) is enabled.If the message persists, replace the interface module. Pages: 1 … 125 126 127 128 129 … 478 wrong Brand wrong Model non readable See also other documents in the category Brocade Computer Accessories: ICX 6650 Hardware Installation Guide (98 pages) FastIron Ethernet Switch Administration Guide (362 pages) FastIron Ethernet Switch Feature and RFC Support Matrix (66 pages) FastIron Ethernet Switch Traffic Management Guide (100 pages) FastIron Ethernet Switch Stacking Configuration Guide (160 pages) FastIron Ethernet Switch Software Upgrade Guide (121 pages) FastIron Ethernet Switch Software Licensing Guide (58 pages) FastIron Ethernet Switch Security Configuration Guide (396 pages) FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide (454 pages) FastIron Ethernet Switch Layer 3 Routing Configuration Guide (672 pages) FastIron Ethernet Switch IP Multicast Configuration Guide (230 pages) FastIron SX, FCX, and ICX Diagnostic Reference (222 pages) ICX 7750 Hardware Installation Guide (80 pages) Network OS YANG Reference Manual v4.1.1 (238 pages) Network OS Software Licensing Guide v4.1.0 (34 pages) Network OS NETCONF Operations Guide v4.1.1 (622 pages) Network OS Feature and RFC Support Matrix (16 pages) Network OS Command Reference v4.1.0 (1418 pages) Network OS Administrator’s Guide v4.1.1 (748 pages) Mid-Mount Rack Kit (Switch) Installation Procedure (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 8000, VA-40FC, VDX 6710-54, and VDX 6740) (10 pages) Flush Mount Rack Kit Installation Procedure (Supporting VDX 6710-54, VDX 6720-24, VDX 6720-60, VDX 6730-32, VDX 6730-76, and VDX 6740) (10 pages) VDX 6710-54 QuickStart Guide (12 pages) VDX 6710-54 Hardware Reference Manual (72 pages) VDX 6730 Hardware Reference Manual (Supporting VDX 6730-32 and VDX 6730-76) (90 pages) VDX 6730 QuickStart Guide (Supporting VDX 6730-32 and VDX 6730-76) (12 pages) Fixed Rack Mount Kit Installation Procedure (Supporting 300, 5100, 5300, 6520, 7800, 8000) (12 pages) VDX 8770-8 Two-Post Flush and Mid-Mount Rack Kit Installation Procedure (8 pages) VDX 8770-8 QuickStart Guide (34 pages) VDX 8770-8 Hardware Reference Manual (136 pages) VDX 8770-8 Four-Post Flush and Recessed Mount Rack Kit Installation Procedure (10 pages) VDX 8770-4 Two-Post Flush and Mid-Mount Rack Kit Installation Procedure (10 pages) VDX 8770-4 QuickStart Guide (32 pages) VDX 8770-4 Hardware Reference Manual (132 pages) VDX 8770-4 Four-Post Flush Mount Rack Kit Installation Procedure (8 pages) VDX 8770-4 Four-Post Flush and Recessed Mount Intake Air Duct Rack Kit Installation Procedure (24 pages) VDX 6740 Hardware Reference Manual (Supporting VDX 6740, VDX 6740T, and VDX 6740T-1G) (78 pages) Universal Four Post Rack Kit Installation Procedure (Supporting VDX 6740T) (20 pages) Universal Two-Post Rack Kit Installation Procedure (Supporting VDX 6740T) (12 pages) FCX Series Hardware Installation Guide (112 pages) 6910 Ethernet Access Switch MIB Reference (102 pages) 6910 Ethernet Access Switch Hardware Installation Guide (84 pages) 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) (88 pages) 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) (1240 pages) Unified IP MIB Reference (Supporting Multi-Service IronWare Release 05.6.00a) (771 pages) Sitemap
(reason , state ).
Disabling slot.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the back-end (non-user) ports have not come online within the time limit.
Recommended
Action
Reload or power cycle the interface module using the power-off and power-on commands.
Execute the diag systemverification command to verify that the interface module does not have
hardware problems.
Execute the diag post command to make sure that Power-On Self-Test (POST) is enabled.
If the message persists, replace the interface module.