Brocade Network OS Message Reference v4.1.1 - Manual (Page 387)

Network OS Message Reference 371
53-1003227-01
SEC-1312
8
SEC-1312
Message
.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the password attributes have been changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1313
Message
The password attributes parameters were set to default values.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the password attributes were set to default values.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1325
Message
Security enforcement: Switch connecting to port is not
authorized to stay in fabric.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified switch is being disabled on the specified port because of a switch connection
control (SCC) policy violation.
Recommended
Action
No action is required unless the switch must remain in the fabric. If the switch must remain in the fabric,
add the switch World Wide Name (WWN) to the SCC policy using the secpolicy defined-policy
scc_policy member-entry command, then attempt to join the switch with the fabric.