Brocade Network OS Message Reference v4.1.1 - Manual (Page 280)

264 Network OS Message Reference
53-1003227-01
L2AG-1004
8
L2AG-1004
Message
FDB error: Error in creating AVL tree.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the Layer 2 Agent (L2AGT) has encountered an error while initializing the AVL tree.
Recommended
Action
Reload or power cycle the switch.
L2AG-1005
Message
MAC-address-table hash failed even after two attempts for slot chip .
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the media access control (MAC) address table hash failed even after two hash changes on
the specified chip.
Recommended
Action
Reload or power cycle the switch.
L2AG-1006
Message
MAC-address-table on slot chip is 95 percent full.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended
Action
Clear some of the entries using the clear mac-address-table dynamic command or wait until the old
entries age out.
L2AG-1007
Message
MAC-address-table on slot chip is less than 90 percent full.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the media access control (MAC) address table is less than 90 percent full.