Fabr-1005, Fabr-1006, Fabr-1007 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 186
![background image](/manuals/361604/186/background.png)
170
Network OS Message Reference
53-1003227-01
FABR-1005
8
Recommended
Action
If this message is due to a one time event because of the incoming data, the system will discard the
frame.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1005
Message
failure reason>) xid = 0x Message Type LOG Severity WARNING Probable Cause Indicates that the application failed to send an async command for the specified port. The message Recommended Action No action is required. This message is often transitory. If the message persists, execute the copy support command and contact your switch service provider. FABR-1006 Message Node free error, caller: Message Type LOG Severity WARNING Probable Cause Indicates that the Network OS is trying to free or deallocate memory space that has already been Recommended Action If the message persists, execute the copy support command and contact your switch service provider. FABR-1007 Message IU free error, caller: Message Type LOG Severity WARNING Probable Cause Indicates that a failure occurred when deallocating an information unit (IU). This message is rare and Recommended Action If the message persists, execute the copy support command and contact your switch service provider.
provides additional details regarding the reason for the failure and the exchange ID of the command. This
can happen if a port is about to go down.
deallocated. This message is rare and usually indicates a problem with the Network OS.
usually indicates a problem with the Network OS.