Auth-1035, Auth-1036, Auth-1037 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 109
Network OS Message Reference
93
53-1003227-01
AUTH-1035
8
AUTH-1035
Message
Invalid length in
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a particular data field in the authentication message has an invalid length field. This error
usually relates to an internal failure.
Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis disable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1036
Message
Invalid state
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the switch received an unexpected authentication message. Usually this problem is
transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis disable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1037
Message
Failed to length>, resp_len , port Message Type LOG Severity ERROR Probable Cause Indicates that a Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) authentication Recommended Action Check the connection port for a possible security attack. Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable If the message persists, execute the copy support command and contact your switch service provider.
operation failed on the specified port due to mismatched response values between two entities. The error
may indicate that an invalid entity tried to connect to the switch.
and chassis disable commands.