Brocade Network OS Message Reference v4.1.1 - Manual (Page 256)

240 Network OS Message Reference
53-1003227-01
HASM-1104
8
HASM-1104
Message
Heartbeat to up.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the active management module has detected that the specified interface module is up.
This message indicates that the interface module is ready to start up services and it is typically displayed
when the interface module boots up.
Recommended
Action
No action is required. This message indicates that the interface module is healthy.
HASM-1105
Message
Switch bring-up timed out.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the system timed out during a reload or failover sequence, waiting for one or more
programs to register with system services or to fail over to active status.
Recommended
Action
If the switch is in an inconsistent state, reload or power cycle the chassis. Before reloading the chassis,
record the firmware version on the switch or management module and execute the ha dump command.
If this is a dual-management module switch, gather the output from the management module in which
this log message appeared.
HASM-1106
Message
Reset the standby management module.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the standby management module is being reset due to loss of heartbeat. This message is
typically seen when the standby management module has been reloaded. Note that in certain
circumstances a management module may experience a double reset and reload twice. A management
module can recover automatically even if it has reloaded twice.
Recommended
Action
No action is required.