Brocade Network OS Message Reference v4.1.1 - Manual (Page 412)

396 Network OS Message Reference
53-1003227-01
SNMP-1001
8
SNMP Messages
SNMP-1001
Message
SNMP service is not available .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of
the specified reason. You will not be able to query the switch through SNMP.
Recommended
Action
Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly using the show
interface management command. If the specified reason is an initialization failure, reload the switch.
SNMP-1002
Message
SNMP initialization failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the initialization of the Simple Network Management Protocol (SNMP) service failed and
you will not be able to query the switch through SNMP.
Recommended
Action
Reload or power cycle the switch. This will automatically initialize SNMP.
SNMP-1003
Message
Distribution of Community Strings to Secure Fabric failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the changes in the Simple Network Management Protocol (SNMP) community strings
could not be propagated to other switches in the secure fabric.
Recommended
Action
Retry changing the SNMP community strings on the primary switch using the snmp-server community
command.