Brocade Network OS Message Reference v4.1.1 - Manual (Page 355)

Network OS Message Reference 339
53-1003227-01
PLAT-1000
8
PLAT Messages
PLAT-1000
Message
.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that nonrecoverable peripheral component interconnect (PCI) errors have been detected.
Recommended
Action
The system will be faulted and may reload automatically.
If the system does not reload, execute the reload command.
Execute the copy support command and contact your switch service provider.
PLAT-1001
Message
MM resetting other MM (double
reset may occur).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the other management module is being reset. This message is typically generated by a
management module that is in the process of becoming the active management module. Note that in
certain circumstances a management module may experience a double reset and reload twice. A
management module can recover automatically even if it has reloaded twice.
Recommended
Action
No action is required.
PLAT-1002
Message
MM:
hk_fence 0x mm_ha
0x mm_status 0x
register. Contents are platform-specific>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that one of the management modules cannot access the inter-integrated circuit (I2C)
subsystem because of an error condition or being isolated from the I2C bus.
Recommended
Action
Reload the management module if it does not reload automatically. Reseat the management module if
reloading does not solve the problem. If the problem persists, replace the management module.