Rcs-1007, Rcs-1008, Rcs-1010 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 372

356
Network OS Message Reference
53-1003227-01
RCS-1007
8
Recommended
Action
If the reject is in ACA phase, wait for several minutes and then retry operation.
If the reject is in the SFC phase, check if the application license exists for the RBridge and if the
application data is compatible.
RCS-1007
Message
Zone DB size and propagation overhead exceeds RBridge
supported Zone DB size
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified RBridge cannot handle the zone database being committed.
Recommended
Action
Reduce the zone database size by deleting some zones. Refer to the Network OS Administrator's Guide
for instructions to delete a zone.
RCS-1008
Message
RBridge
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified RBridge has the lowest memory available for the zone database in the fabric.
The zone database must be smaller than the memory available on this RBridge.
Recommended
Action
Reduce the zone database size by deleting some zones. Refer to the Network OS Administrator's Guide
for instructions to delete a zone.
RCS-1010
Message
RBridge
E_port(s) connected to this RBridge.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates inability to retrieve RCS-capable information for the specified RBridge due to some potential
routing issues.
Recommended
Action
Investigate for routing issue or check the cabling, and re-enable the disabled E_ports to attempt another
exchange of RCS-capable information.