Brocade Network OS Message Reference v4.1.1 - Manual (Page 252)

236 Network OS Message Reference
53-1003227-01
HASM-1015
8
HASM-1015
Message
Error happens on service instance :
(Critical, reboot to recover).
Message Type
LOG | FFDC
Severity
CRITICAL
Probable Cause
Indicates software failure.
Recommended
Action
Execute the copy support command after the system boots up.
HASM-1019
Message
Firmware operation () was aborted due to disconnection of the peer
node.
Message Type
LOG | VCS
Severity
WARNING
Probable Cause
Indicates that the peer node has been reloaded or disconnected due to a software error.
Recommended
Action
No action is required. Firmware commit will be started automatically to repair the compact flash (CF)
partitions in the system.
HASM-1020
Message
Firmware operation () was aborted due to timeout.
Message Type
LOG | FFDC | VCS
Severity
WARNING
Probable Cause
Indicates that the firmware operation took too long to complete due to CPU overload or other software
errors.
Recommended
Action
No action is required. Firmware commit will be started automatically to repair the compact flash (CF)
partitions in the system.