Brocade Network OS Message Reference v4.1.1 - Manual (Page 285)

Network OS Message Reference 269
53-1003227-01
L2SS-1010
8
L2SS-1010
Message
Fabric-wide l2 flush completed, status - .
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the entire Layer 2 forwarding table has been cleared.
Recommended
Action
No action is required.
L2SS-1011
Message
Security violation occured on interface with Mac
.. Vlan .
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the number of Media Access Control (MAC) addresses allowed on the specified interface
has reached the maximum limit. Based on the configured action, the interface is either shut down or the
MAC learning is restricted.
Recommended
Action
No action is required.
L2SS-1012
Message
Failed to create Tunnel .
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that tunnel creation was unsuccessful.
Recommended
Action
Technical support is required.