Vcs-1007, Vcs-1008, Vcs-1009 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 465
Network OS Message Reference
449
53-1003227-01
VCS-1007
8
VCS-1007
Message
Event: VCS node remove, Coordinator IP: Id>, Status: rBridge ID removed from VCS cluster. Message Type LOG | VCS Severity INFO Probable Cause Indicates that VCS is disabled on the node that was part of a VCS cluster. Recommended Action No action is required. VCS-1008 Message Event: VCS node remove, Coordinator IP: Id>, Status: rBridge ID Switch That Failed To Be Removed>) failed removal from VCS cluster, Reason: Reason>. Message Type LOG | VCS Severity ERROR Probable Cause Indicates that a logical-chassis node failed to be removed from the VCS cluster. Refer to the reason code Recommended Action Refer to reason code for possible action. VCS-1009 Message Event: VCS node disconnect, Coordinator IP: Switch That Disconnected >) disconnected from VCS cluster. Message Type LOG | VCS Severity INFO Probable Cause Indicates that the heartbeat loss to a logical-chassis node occurred because the node was reloaded or all Recommended Action If you had issued the reload command, no action is required. If for another reason, check the state of the
for the cause of the error.
interswitch links (ISLs) to the node are down.
disconnected node and the ISLs to the disconnected node.