Brocade Network OS Message Reference v4.1.1 - Manual (Page 108)

92 Network OS Message Reference
53-1003227-01
AUTH-1032
8
AUTH-1032
Message
Failed to generate for payload: length
length>, error code , port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authentication process failed to generate specific data (for example, challenge, nonce,
or response data) for an authentication payload. This usually relates to an internal failure. A nonce is a
single-use, usually random value used in authentication protocols to prevent replay attacks. Usually this
problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1033
Message
Disable port due to unauthorized switch .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an entity, which was not configured in the switch connection control (SCC) policy tried to
connect to the port.
Recommended
Action
Add the entity World Wide Name (WWN) to the SCC policy using the secpolicy defined-policy
command, then reinitialize authentication using the shutdown and no shutdown commands or the
chassis disable and chassis enable commands.
AUTH-1034
Message
Failed to validate name in : port
number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the entity name in the payload is not in the correct format.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.