Brocade Network OS Message Reference v4.1.1 - Manual (Page 301)

Network OS Message Reference 285
53-1003227-01
MCST-1010
8
MCST-1010
Message
Message Queue error: ().
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the multicast subsystem (mcast_ss) has encountered the message queue errors.
Recommended
Action
Reload or power cycle the switch.
MCST-1011
Message
IDB error: () port index not found for VLAN ID
.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the specified port index is invalid.
Recommended
Action
If there is an impact on the data path, reload or power cycle the switch. Refer to the Network OS
Administrator's Guide for instructions to verify the data path.
MCST-1012
Message
IDB error: () VLAN ID not found.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the specified VLAN ID (VID) is invalid.
Recommended
Action
If there is an impact on the data path, reload or power cycle the switch. Refer to the Network OS
Administrator's Guide for instructions to verify the data path.