Brocade Network OS Message Reference v4.1.1 - Manual (Page 473)

Network OS Message Reference 457
53-1003227-01
ZONE-1029
8
Recommended
Action
Edit the zone database to keep it within the allowable limit for the specific switches in your fabric. You can
view the zone database size information using the show zoning operation-info command.
ZONE-1029
Message
Restoring zone cfg from flash failed - bad config saved to
[].
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the zone configuration restored from the flash was faulty. This error will save the faulty
zone configuration in the zoned core file directory.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.
ZONE-1032
Message
RBridge Max Zone DB size .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified RBridge does not have enough memory for the zone database being
committed.
Recommended
Action
Reduce the size of the zone database by deleting some zones and retry the operation. Refer to the
Network OS Administrator's Guide for instructions to delete a zone.
ZONE-1033
Message
RBridge Lowest Max Zone DB size.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified RBridge has the lowest memory available for the zone database in the fabric.
The zone database must be smaller than the memory available on this RBridge.
Recommended
Action
Reduce the size of the zone database by deleting some zones and retry the operation. Refer to the
Network OS Administrator's Guide for instructions to delete a zone.