Brocade Network OS Message Reference v4.1.1 - Manual (Page 250)

234 Network OS Message Reference
53-1003227-01
HASM-1003
8
HASM-1003
Message
Error happened on service instance :
.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a software error such as mismatch in the fabric synchronization service (FSS) configuration.
Recommended
Action
Execute the copy support command and reload the system manually to recover.
HASM-1004
Message
Processor reloaded - .
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that the system has been reloaded either because of a user action or an error. The switch
reload can be initiated by one of the following commands: firmware download, fastboot, ha failover,
and reload. Some examples of errors that may initiate this message are hardware errors, software
errors, compact flash (CF) errors, or memory errors. The reason for reload can be any of the following:
•
Hafailover
•
Reset
• Fastboot
• Giveup Master:SYSM
• CP Faulty:SYSM
• FirmwareDownload
•
ConfigDownload:MS
• ChangeWWN:EM
• Reboot:WebTool
• Fastboot:WebTool
• Software Fault:Software Watchdog
•
Software Fault:Kernel Panic
•
Software Fault:ASSERT
• Reboot:SNMP
• Fastboot:SNMP
• Reboot
• Chassis Config
•
Reload:API
•
Reload:HAM
• EMFault:EM