Brocade Network OS Message Reference v4.1.1 - Manual (Page 472)

456 Network OS Message Reference
53-1003227-01
ZONE-1024
8
ZONE-1024
Message
.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the zoning enabled-configuration cfg-action cfg-save command was executed
successfully.
Recommended
Action
No action is required.
ZONE-1027
Message
Zoning transaction aborted .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the zoning transaction was aborted because of one of the following conditions:
• Zone Merge Received: The fabric is in the process of merging two zone databases.
•
Zone Config update Received: The fabric is in the process of updating the zone database.
•
Bad Zone Config: The new configuration is not viable.
• Zoning Operation failed: A zoning operation failed.
• Shell exited: The command shell has exited.
• Unknown: An error was received for an unknown reason.
•
User Command: A user aborted the current zoning transaction.
•
Switch Shutting Down: The switch is currently shutting down.
Most of these error conditions are transitory.
Recommended
Action
Try again after some time. Verify that only one administrator is modifying the zone database at a time.
ZONE-1028
Message
Commit zone DB larger than supported - greater than
size>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone
database size depends on the lowest level switch in the fabric. Older switches have less memory and
force a smaller zone database for the entire fabric.