Brocade Network OS Message Reference v4.1.1 - Manual (Page 447)

Network OS Message Reference 431
53-1003227-01
TRCE-1006
8
TRCE-1006
Message
FTP Connectivity Test succeeded to FTP site ' '.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a connectivity test to the FTP host has succeeded.
Recommended
Action
No action is required.
TRCE-1007
Message
Notification of this MM has failed. Parameters temporarily out of sync with other
MM.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the active management module was unable to alert the standby management module of a
change in the trace status. This message is only applicable to modular switches.
Recommended
Action
This message is often transitory. Wait a few minutes and try the command again.
If the message persists, execute the copy support command and contact your switch service provider.
TRCE-1008
Message
Unable to load trace parameters.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the management module is unable to read the stored trace parameters.
Recommended
Action
Reload the switch or the chassis.
If the message persists, execute the copy support command and contact your switch service provider.