Brocade Network OS Message Reference v4.1.1 - Manual (Page 241)

Network OS Message Reference 225
53-1003227-01
FW-1500
8
FW-1500
Message
Mail overflow - Alerts being discarded.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a mail alert overflow condition has occurred.
Recommended
Action
Resolve or disable the mail alert using the system-monitor-mail fru command.
FW-1501
Message
Mail overflow cleared - alerts discarded.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the mail overflow condition has cleared.
Recommended
Action
No action is required.
FW-1510
Message
threshold exceeded: Port disabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified port is now disabled because the link on this port had multiple link failures
that exceed Fabric Watch (FW) threshold on the port. The link failures occurred due to one of following
reasons:
•
Physical and hardware problems on the switch.
•
Loss of synchronization.
•
Hardware failures.
• A defective small form-factor pluggable (SFP) transceiver or faulty cable.
Protocol errors indicates cyclic redundancy check (CRC) sum disparity. Occasionally, these errors occur
due to software glitches. Persistent errors occur due to hardware problems.
Recommended
Action
Check for concurrent loss of synchronization errors. Check the SFP transceiver and the cable and
enable the port using the no shutdown command.