Brocade Network OS Message Reference v4.1.1 - Manual (Page 194)

178 Network OS Message Reference
53-1003227-01
FABS-1007
8
FABS-1007
Message
: Media state is invalid - status=.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Network OS has detected an invalid value in an object status field. This is usually an
internal Network OS problem or file corruption.
Recommended
Action
Reload or power cycle the switch.
If the message persists, execute the firmware download command to update the firmware.
FABS-1008
Message
: Media OID mapping failed.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Network OS was unable to locate a necessary object handle. This is usually an internal
Network OS problem or file corruption.
Recommended
Action
Reload or power cycle the switch.
FABS-1009
Message
: type is not media.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Network OS was unable to locate an appropriate object handle. This is usually an
internal Network OS problem or file corruption.
Recommended
Action
Reload or power cycle the switch.