Brocade Network OS Message Reference v4.1.1 - Manual (Page 171)

Network OS Message Reference 155
53-1003227-01
EM-1014
8
EM-1014
Message
Unable to read sensor on ().
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the environmental monitor (EM) was unable to access the sensors on the specified
field-replaceable unit (FRU).
Recommended
Action
Reseat the FRU. If the problem persists, replace the FRU.
EM-1015
Message
Warm recovery failed ().
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a problem was discovered when performing consistency checks during a warm boot.
Recommended
Action
Monitor the switch. If the problem persists, reload or power cycle the switch.
EM-1016
Message
Cold recovery failed ().
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a problem was discovered when performing consistency checks during a cold boot.
Recommended
Action
Monitor the switch. If the message persists, execute the copy support command and contact your
switch service provider.