Brocade Network OS Message Reference v4.1.1 - Manual (Page 105)

Network OS Message Reference 89
53-1003227-01
AUTH-1020
8
AUTH-1020
Message
Failed to create timer for authentication: port .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that an authentication message timer was not created.
Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1022
Message
Failed to extract from payload: port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authentication process failed to extract a particular value from the receiving payload.
Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1025
Message
Failed to get during : port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authentication process failed to get expected information during the specified
authentication phase. Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.