Brocade Network OS Message Reference v4.1.1 - Manual (Page 107)

Network OS Message Reference 91
53-1003227-01
AUTH-1029
8
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1029
Message
Failed to get for message: port , retval
.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authentication process failed to get a particular authentication value at certain phase.
Usually this problem is transient. The authentication may fail.
The data type is a payload or structure that failed to get memory.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1030
Message
Invalid message code for message: port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the receiving payload does not have a valid message code during the specified
authentication phase. Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1031
Message
Failed to retrieve secret value: port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the secret value was not set properly for the authenticated entity.
Recommended
Action
Reset the secret value using the fcsp auth-secret command.
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.