Lsdb messages, Lsdb-1001, Lsdb-1002 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 296: Lsdb-1003

280
Network OS Message Reference
53-1003227-01
LSDB-1001
8
LSDB Messages
LSDB-1001
Message
Link State ID out of range.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified link state database ID is out of the acceptable range. The valid link state ID is
the same as the valid RBridge ID, whose range is from 1 through 239. The switch will discard the record
because it is not supported.
Recommended
Action
No action is required.
LSDB-1002
Message
Local Link State Record reached max incarnation.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the local link state database reached the maximum incarnation.
An "incarnation" is a progressive number that identifies the most recent version of the link state record
(LSR). The switch generates its local link state record when first enabled. The incarnation number will
begin again at 0x80000001 after reaching 0x7FFFFFFF.
Recommended
Action
No action is required.
LSDB-1003
Message
No database entry for local Link State Record, RBridge
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that there is no local link state record (LSR) entry in the link state database. The switch should
always generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of LSR. The switch
generates its local LSR when first enabled. By disabling and enabling the switch, a new local link state
record is generated.