Brocade Network OS Message Reference v4.1.1 - Manual (Page 102)

86 Network OS Message Reference
53-1003227-01
AUTH-1004
8
AUTH-1004
Message
Failed to set type to .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fcsp auth command has failed to set the authentication configuration value. The data
type can be either authentication type, DH group type, hash type, or policy type.
Recommended
Action
Execute the fcsp auth command.
Execute the copy support command and contact your switch service provider.
AUTH-1006
Message
Failed to open authentication configuration file.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an internal problem with the security policy.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis enable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1007
Message
The proposed authentication protocol(s) are not supported: port .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the proposed authentication protocol types are not supported by the local port.
Recommended
Action
Execute the fcsp auth command to make sure the local switch supports the following protocols: Fibre
Channel Authentication Protocol (FCAP) or Diffie-Hellman Challenge Handshake Authentication Protocol
(DH-CHAP).