Brocade Network OS Message Reference v4.1.1 - Manual (Page 471)

Network OS Message Reference 455
53-1003227-01
ZONE-1019
8
ZONE-1019
Message
Transaction Commit failed. Reason code () -
\"\".
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit
changes to the configuration database within a fabric.
Recommended
Action
Often this message indicates a transitory problem. Wait a few minutes and retry the command.
Make sure your changes to the zone database are not overwriting the work of another administrator.
Execute the show zoning operation-info command to know if there is any outstanding transaction
running on the local switches.
If the message persists, execute the copy support command and contact your switch service provider.
ZONE-1022
Message
The effective configuration has changed to .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the effective zone configuration has changed to the specified configuration name.
Recommended
Action
Verify that the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
ZONE-1023
Message
Switch connected to port () is busy. Retrying zone merge.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the switch is retrying the zone merge operation. This usually occurs if the switch on the
other side of the port is busy.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.