Brocade Network OS Message Reference v4.1.1 - Manual (Page 427)

Network OS Message Reference 411
53-1003227-01
SSMD-1500
8
SSMD-1500
Message
TCAM region usage on chip / is below
percent.
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates that ternary content addressable memory (TCAM) usage on the chip is below threshold.
Recommended
Action
TCAM is full and therefore clear some of the entries or do not add entries.
SSMD-1536
Message
TCAM region usage on chip / is above
percent.
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates that the access control list (ACL), which is bound to interfaces is consuming ternary content
addressable memory (TCAM) entries in the hardware.
Recommended
Action
Remove ACLs that are not required using the ip access-list command.
SSMD-1537
Message
TCAM region on chip / is
percentage> percent full.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the access control list (ACL), which is bound to interfaces is consuming ternary content
addressable memory (TCAM) entries in the hardware.
Recommended
Action
Remove ACLs that are not required using the ip access-list command.