Brocade Network OS Message Reference v4.1.1 - Manual (Page 199)

Network OS Message Reference 183
53-1003227-01
FCOE-1020
8
FCOE-1020
Message
Login rejected by FC stack.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the login was rejected by the Fibre Channel (FC) stack.
Recommended
Action
No action is required. The device will try to login again.
FCOE-1022
Message
Max FCoE device login limit reached.
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates that the switch has reached its maximum allowed Fibre Channel over Ethernet (FCoE) device
limit.
Recommended
Action
Do not add any more FCoE devices to the switch.
FCOE-1023
Message
Too many logins on FCoE controller from Device MAC: , max
allowed = .
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates that the controller has reached its maximum allowed Fibre Channel over Ethernet (FCoE) login
limit.
Recommended
Action
Log out some of the logged-in devices using one of the following commands: no fcoeport default,
shutdown, and clear fcoe login, and then log in the new device.
You can view the list of logged-in devices using the show fcoe login command.