Brocade Network OS Message Reference v4.1.1 - Manual (Page 432)

416 Network OS Message Reference
53-1003227-01
SULB-1103
8
Recommended
Action
Execute the show firmwaredownloadstatus command for more information. Restart the firmware
operation if needed.
SULB-1103
Message
Firmware download completed successfully on .
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that firmware download has completed successfully on the specified slot or partition.
Recommended
Action
No action is required.
Execute the show firmwaredownloadstatus command for more information. Execute the show
version to verify the firmware version.
SULB-1104
Message
Firmware download failed on with error ().
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
CRITICAL
Probable Cause
Indicates that firmware download has failed on the specified slot. The error code indicates the reason for
the failure.
The following table lists the error codes that provide more details on why the firmware operation failed.
TABLE 10 Error messages and error codes
Error message Error code
"Upgrade is inconsistent." 0x10
"OSRootPartition is inconsistent." 0x11
"Unable to access the package list file. Check whether the file name is specified
properly." 0x12
"Red Hat package manager (RPM) package database is inconsistent. Contact your
service provider for recovery." 0x13
"Out of memory." 0x14
"Failed to download RPM package. Check if the firmware image is accessible." 0x15
"Unable to create firmware version file." 0x16
"Unexpected system error." 0x17
"Another firmware download is in progress." 0x18