Brocade Network OS Message Reference v4.1.1 - Manual (Page 237)

Network OS Message Reference 221
53-1003227-01
FW-1430
8
FW-1430
Message
Switch status change contributing factor .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of faulty
temperature sensors is greater than or equal to the policy set by the system-monitor command. A
temperature sensor is faulty when the sensor value is not in the acceptable range.
Recommended
Action
Replace the field-replaceable unit (FRU) with the faulty temperature sensor.
FW-1431
Message
Switch status change contributing factor Fan: bad.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of faulty fans is
greater than or equal to the policy set by the system-monitor command. A fan is faulty when sensor
value is not in the acceptable range.
Recommended
Action
Replace the faulty or deteriorating fans.
FW-1432
Message
Switch status change contributing factor Cid-Card: bad.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of faulty Chassis ID
(CID) cards is greater than or equal to the policy set by the system-monitor command.
Recommended
Action
Replace the faulty CID card.