Brocade Network OS Message Reference v4.1.1 - Manual (Page 254)

238 Network OS Message Reference
53-1003227-01
HASM-1025
8
Recommended
Action
Execute the copy support command and contact your switch service provider.
HASM-1025
Message
HA is disconnected between the MMs due to incompatible features.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a feature is enabled and it is not compatible with the firmware running on the standby
management module.
Recommended
Action
Upgrade the firmware on the standby management module to be the same as the active management
module before enabling the feature.
HASM-1026
Message
The last reboot is due to Kernel Panic in .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the system has reloaded due to kernel panic in the specified module.
Recommended
Action
Execute the copy support command and contact your switch service provider.
HASM-1100
Message
HA State is in sync.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the high availability (HA) state for the active management module is in synchronization with
the HA state of the standby management module. If the standby management module is healthy, the
failover will be nondisruptive.
Recommended
Action
No action is required.