Brocade Network OS Message Reference v4.1.1 - Manual (Page 32)

16 Network OS Message Reference
53-1003227-01
Viewing and clearing the RASLog messages
1
NOS: v4.1.1
2012/05/30-21:25:34, [NSM-1004], 41, M1 | DCE, INFO, switch, Interface Vlan
4093 is created.
2012/05/30-21:25:34, [NSM-1019], 42, M1 | DCE, INFO, switch, Interface Vlan
4093 is administratively up.
2012/05/30-21:25:52, [DOT1-1013], 50, M1 | DCE, INFO, switch, DOT1X test
timeout has set to 10.
2012/05/30-21:25:52, [ONMD-1002], 59, M1 | DCE, INFO, switch, LLDP global
configuration is changed.
2012/05/30-21:25:53, [SSMD-1602], 63, M1 | DCE, INFO, switch, Class map
default is created.
2012/05/30-21:25:55, [NSM-1004], 58, M1 | DCE, INFO, switch, Interface Vlan
1002 is created.
2012/05/30-21:25:55, [ONMD-1002], 59, M1 | DCE, INFO, switch, LLDP global
configuration is changed.
2012/05/30-21:25:59, [SSMD-1602], 63, M1 | DCE, INFO, switch, Class map
default is created
[...]
Clearing the DCE messages
To clear the DCE messages for a particular switch instance, perform the following steps.
1. Log in to the switch as admin.
2. Execute the clear logging raslog message-type DCE command to clear all DCE messages from
the local switch.
Displaying the VCS messages
This section provides information on viewing the VCS messages saved on the switch memory.
To display the saved VCS messages, perform the following steps.
1. Log in to the switch as admin.
2. Enter the show logging raslog attribute VCS command at the command line.
switch# show logging raslog attribute VCS
NOS: v4.1.1
2012/06/05-03:00:18:101601, [VCS-1009], 8002/3929, VCS, INFO, VDX6720-60,
Event: VCS node disconnect, Coordinator IP: 192.0.2.15, VCS Id: 1, Status:
Rbridge-id 3 (192.0.2.2) disconnected from VCS cluster.
2012/06/05-03:04:11:621996, [VCS-1005], 8051/3935, VCS, INFO, VDX6720-60,
Event: VCS node rejoin, Coordinator IP: 192.0.2.15, VCS Id: 1, Status:
Rbridge-id 3 (192.0.2.2) rejoined VCS cluster.
[...]