Brocade Network OS Message Reference v4.1.1 - Manual (Page 217)

Network OS Message Reference 201
53-1003227-01
FVCS-2005
8
FVCS-2005
Message
FCS Cancel stage Failed - cfg type , cfg tag
Tag>, domain , reason ().
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the fabric configuration server (FCS) cancel stage has failed. The failure reason can be
one of the following:
•
7 - Memory allocation error
• 14 - Reliable Transport Write and Read (RTWR) send failure
Recommended
Action
Check the status of the virtual link aggregation group (vLAG) identified by the configuration tag.
If the message persists, execute the copy support command on both this RBridge and the remote
RBridge specified by the domain field and contact your switch service provider.
FVCS-2006
Message
FCS Transaction Hung - cfg type , cfg tag ,
trans state.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the update cannot be completed for an unknown reason.
Recommended
Action
Check the status of the virtual link aggregation group (vLAG) identified by the configuration tag.
If the message persists, execute the copy support command and contact your switch service provider.
FVCS-3001
Message
Eth_ns Message Queue Overflow. Failed to send Update. MAC or MCAST database may be
out of sync. Queue size = ().
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Eth_ns (component of FVCS) that kept the MCAST and L2 databases in sync cannot
send an update to the remote RBridges because its internal message queue is full. This error is due to a
temporary congestion issue on the local RBridge.
Recommended
Action
The RBridge must leave and rejoin the fabric for synchronization of the MCAST and L2 databases.